5 Valuable Tips to Reduce Your Fridge’s Power Consumption

Over the years, home energy bills have risen considerably, and this has led homeowners to look for ways to reduce their utility costs. One of the biggest power consumers in the home is the fridge because it runs all day. However, there is no better way to store food than with a refrigerator because you cannot just get rid of the food. Nevertheless, the good news is that there are steps that you can take to help reduce your electricity bills. 

In this article, we will share five valuable on how you can reduce your power consumption:

Store the Food Properly

Your machine’s temperature is vital to the overall longevity of your system and electricity costs. If the refrigerator is working too hard to regulate its temperature, then it would put more strain on its system, which results in higher electricity costs. What’s worse is that it can even lead to costly repairs. 

For this reason, you should store your food right by keeping it 2/3rds full. Do not overcrowd it because your refrigerator can use some breathing space. That way, only less air can leak out, and it won’t work so hard to regulate the temperature inside. 

Moreover, you need to place the food items in the right places. Meat and poultry should be placed near the cold-air inlet and produce in cool sections. 

Keep an Eye Out for Temperature Changes

If you want to save more money in utility bills, you might want to consider a thermometer you can use for your machine. When its temperature is too cold, you will be wasting a huge amount of energy, while when it becomes too warm, it could lead to food spoilage. Getting a thermometer can help you keep track of significant changes before it’s too late. 

Moreover, you need to be mindful of the season. When seasons change, you may need to adjust the temperature settings of your refrigerator as well.

Be Mindful of Frosting

If your fridge has a freezer that needs manual defrosting, then you will need to defrost it regularly. Keep in mind that you shouldn’t let too much frost build-up or your system will produce more energy to regulate its temperature. A good rule of thumb is that if the ice inside the freezer is over 1 cm thick, then you should defrost it. 

Clean Condenser Coils Regularly

Many homeowners often overlook the external parts of a home refrigeration system until they cause trouble. You will not want these parts to cause any problem, and you surely will not want them to cause higher energy costs. Keep in mind that condenser coils play a major role in creating cold air, but they can’t do that when there is a build-up of dust or grime on the coil. All you need to do is turn the fridge off and use a coil brush or a vacuum cleaner to clean them. Do this at least two to three times a year, and you’re on the right track! 

Do a Door Seal Check

One of the major culprits of energy loss is a leaky door seal, which is why you need to regular door seal checks on your systems. If you notice condensation outside, then that’s an indicator that you need to get its seals replaced. 

You can test if they are working correctly by doing the paper test. Close the door on a piece of paper. A well-sealed door will hold tightly to the paper, but if it falls out or slides down easily, it’s time to replace or clean the seals. 

Conclusion

At this point, you now know that you don’t have to bear any longer with high electricity bills at home. Your fridge consumes massive power, yet if you use and learn to take care of it right, it will help reduce your utility expenses. On top of that, rest assured that the tips mentioned above will not compromise your food items; all you need to do is organize, track, and clean it. 

Do you want to know how much does it cost to run a mini-fridge? Check out Pixel Fridge today as we have a wide range of topics that will help you take care of your refrigeration system!

Click Here to Leave a Comment Below 0 comments

Leave a Reply:


The reCAPTCHA verification period has expired. Please reload the page.